Alpine PSS-22WRA Full Sound System Installation Guide '11 - '18 JK Wrangler

Please follow these installation tips when you're ready to install your new Alpine Sound System Bundle into your 2011-2018 Jeep JK.

NOTE: If you opted for the Trail Seven factory amplifier by-pass harness, you will need to remove the factory amplifier which is located where the new amps from the PSS-22WRA will mount.  You will connect the adapters from the factory amplifier into the connectors in the harness which will tie into the factory speakers utilizing the existing wiring. 

These tips are intended to be used in conjunction with Alpines full installation video below:

 Additional Tips To Follow

Congratulations, you’re ready to enjoy your new Alpine tunes!