Kicker Plug and Play Powered Down-Firing Subwoofer Install I '21- Current Bronco

 Welcome to your Kicker Powered Down-Firing Plug and Play Installation Guide.

The following information will walk you through the entire installation which includes a video at the bottom to follow along.  This video also applies to the Kicker LT7 Powered Subs.  

** NOTE: The installation video demonstrates the wiring connection at the kick speaker in a B&O Bronco.  The Non-B&O has a slighty different wiring configuration which the below pics will demonstrate both Bronco factory configurations.  In both configurations, you will tap into the outter wires. 

If you have any questions at all, or need anything during the installation, we're only a phone call away and we're available Monday-Friday, 9am-5pm est. for any support needed, or you can shoot us an email at support@trailseven.com.  

These installation notes are intended to be used in conjunction with the installation video below. 

Amplifier adjustments/ settings: Please see section 6:18 - 7:40 for recommended amplifier settings. 

Trail Seven Installation Video: