PRODUCT HIGHLIGHTS:
Alpine SPV-65X-WRA Speakers: The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.
Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.
- Built specifically for the 07-18 Jeep Wrangler JK
- Weather resistant
- 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters to fit both the '07-'14 Wranglers as well as the '15-'18 Wranglers
- CTA-2031 Power Rating: 75W RMS, 225W Peak
- Nominal impedance 4 Ohm
- Frequency response 65-22kHz
- 1” Teteron dome tweeter
- Steel frame with factory speaker mounting tabs
- Weather resistant: IP55
- Includes vehicle specific speaker connectors
Alpine HDA-V90 Status Hi-Res 5-Channel Amplifier: With the highest quality music streaming available on the market, Alpine Status delivers a superior level of audio performance that will take your music to a whole new level.
- 75W x 4 + 300W x 1 @ 4Ω
- 100W x 4 + 500W x 1 @ 2Ω
- Hi-Res Audio Playback (192kHz/24Bit)
- High-Efficiency Digital Circuit Design
- Alpine’s Dual Negative Feedback Control Circuit
- High Bandwidth Amplifier
- Alpine’s Premium Class D Circuit Design
- Copper-plated chassis
- Black circuit board
- One-sided terminal layout
- Top panel sound controls
- Quick connect power and speaker terminals
- Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately)
Single 10" R-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the R-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.
- 600W RMS Power Handling
- Frequency response: 29Hz – 200Hz
- Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)
- Nominal Impedance: 2Ω
- Optimal sealed cabinet quality
- Aluminum Dust Cap
- Neodymium Magnet
- Alpine Gen2 DD Linear Magnetic Circuit
- CARB compliant ¾” MDF construction
- Premium Alpine embroidered black carpet
- Alpine-branded terminal cup
- Pre-installed steel mesh grille
- Includes a 10” R-Shallow Subwoofer (RS-W10D4)
- Rubber, modular stackable foot design
Single 12" R-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the R-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.
- 600W RMS Power Handling
- Frequency response: 26Hz – 200Hz
- Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)
- Nominal Impedance: 2Ω Voice Coil: 4”(101.6mm)
- Optimal sealed cabinet quality
- Aluminum Dust Cap
- Neodymium Magnet
- Alpine Gen2 DD Linear Magnetic Circuit
- CARB compliant ¾” MDF construction
- Premium Alpine embroidered black carpet
- Alpine-branded terminal cup
- Pre-installed steel mesh grille
- Includes a 12” R-Shallow Subwoofer (RS-W12D4)
- Rubber, modular stackable foot design
Alpine Halo R-Series Preloaded Sub Enclosure R-DB8V-TRK: With the adjustability from 40" to 51", this subwoofer is a perfect fit for the Jeep Wrangler JK. Two 8” subwoofers are preloaded into a compact enclosure which are a perfect fit for rear cargo area. Rubber “feet” are adjustable in height to accommodate uneven floors and the size does not prevent accessing the cargo area under mat storage bin.
- 750W RMS
- Frequency Response: 34Hz-200Hz
- Dual voice coils wired in parallel for a 2Ω load (Two 4Ω enclosures)
- Compatible with R2-A75M Amplifier for Optimal Power Output
- Vented/ Ported Enclosure Tuning Frequency: 36Hz
- Custom spring-loaded speaker terminals fit up to 12AWG speaker wire
- 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D)
- Groundbreaking Alpine Halo Design
- ProLink™ Ported Enclosure
- Expandable Width from 40" to 51"
- Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas
- Ported Enclosures with Next-Gen R-Series Subwoofers
- Front Link Alpine Branded Bracket
- Side-Firing Cabin Loading Ports
- Premium Alpine Wire Terminals
- Twist-Lock Grille Mount System
- CARB Compliant 5/8" MDF Construction
- Premium Black Carpet