Alpine Plug and Play Full System S-Series 5-Channel, Speakers, Sub Bundle | '07- '18 Jeep JK Wrangler

Your plug and play bundle is hand assembled in our Frederick, MD facility. Current processing lead times from order to ship: 6-8 business days

Our bundle is delivered exactly as shown in the product images—prepped and ready for installation. We take care of terminating the power and ground leads and setting up the amp harness for compatibility with both factory-amplified and non-factory amplified systems. Additionally, the speakers are pre-terminated with the appropriate connectors and crossovers, ensuring your system bundle is fully ready to install as soon as you receive it.

PLUG & PLAY: Every bundle is pre-wired and fully assembled at our Frederick, Maryland shop before shipping. When your bundle arrives, it's ready to drop right into your vehicle. Just follow our step-by-step video and installation guides for an effortless plug-and-play installation.

TESTED AND APPROVED BY TRAIL SEVEN: The Kicker speaker, amp, and sub-bundle have been installed and tested on our Trail Seven Jeep and we're pleased to put our stamp of approval on this bundle.

Alpine SPV-65X-WRA Speakers: The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.

Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.

• Built specifically for the 07-18 Jeep Wrangler JK
• Weather resistant
• 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters to fit both the '07-'14 Wranglers as well as the '15-'18 Wranglers
• CTA-2031 Power Rating: 75W RMS, 225W Peak
• Nominal impedance: 4 Ohm
• Frequency response: 65-22kHz
• 1” Teteron dome tweeter
• Steel frame with factory speaker mounting tabs
• Weather resistant: IP55
• Includes vehicle specific speaker connectors

Alpine Next-Gen S-Series 5-Channel Amplifier: The Next-Gen Alpine S-Series S2-A55V 5-Channel Amplifier is Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price.

• Power Output: 40W x 4 + 200W x 1 @ 4Ω, 60W x 4 + 300W x 1 @ 2Ω
• Hi-Res Audio Playback (192kHz/24Bit)
• 5-Channel Amplifier
• High-Efficiency Digital Circuit Design
• Alpine’s Dual Negative Feedback Control Circuit
• High Bandwidth Amplifier
• Alpine’s Premium Class D Circuit Design
• One-sided terminal layout
• Top panel sound controls
• Quick connect power and speaker terminals
• Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately)

Single 10" S-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the 10" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.

• Preloaded 10” S-Shallow Subwoofer
• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)
• Power Handling: 300W RMS
• Frequency Response: 35Hz-200Hz
• X-Max: 11mm 1-Way Linear
• Nominal Impedance: 2Ω
• Copper Voice Coil: 2” (50.0mm)
• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)
• Optimal Sealed Cabinet Quality
• Neodymium Magnet
• Front-Mounted Neodymium Motor
• Alpine Gen2 DD Linear Magnetic Circuit
• Rugged Polymer Enclosure Cabinet
• Adjustable, Foam-padded Mounting Brackets for Flexible Installation & Reduced Vibration

Single 12" S-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.

• Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)
• Power Handling: 300W RMS
• Frequency Response: 30Hz-200Hz
• X-Max:11mm 1-Way Linear
• Nominal Impedance: 2Ω
• Copper Voice Coil: 2” (50.0mm)
• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)
• Optimal Sealed Cabinet Quality
• Preloaded 12” S-Shallow Subwoofer
• Neodymium Magnet
• Front-Mounted Neodymium Motor
• Alpine Gen2 DD Linear Magnetic Circuit
• Rugged Polymer Enclosure Cabinet
• Adjustable, Foam-padded Mounting Brackets for Flexible Installation & Reduced Vibration
  

Alpine Halo S-Series Preloaded Sub Enclosure S-DB8V-TRK: With the adjustability from 40" to 51", this subwoofer is a perfect fit for the Jeep Wrangler JK. Two 8” subwoofers are preloaded into a compact enclosure which are a perfect fit for rear cargo area. Rubber “feet” are adjustable in height to accommodate uneven floors and the size does not prevent accessing the cargo area under mat storage bin.

• 600W RMS
• Frequency Response: 34Hz-200Hz
• Dual voice coils wired in parallel for a 2Ω load (Two 4Ω enclosures)
• Compatible with S2-A60M Amplifier for Optimal Power Output
• Vented/ Ported Enclosure Tuning Frequency: 36Hz
• Custom spring-loaded speaker terminals fit up to 12AWG speaker wire
• 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D)
• Groundbreaking Alpine Halo Design
• ProLink™ Ported Enclosure
• Expandable Width from 40" to 51"
• Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas
• Ported Enclosures with Next-Gen R-Series Subwoofers
• Front Link Alpine Branded Bracket
• Side-Firing Cabin Loading Ports
• Premium Alpine Wire Terminals
• Twist-Lock Grille Mount System
• CARB Compliant 5/8" MDF Construction
• Premium Black Carpet

COMPATIBILITY:

• Fits: 2007 - 2018 Jeep Wrangler JK
• Compatible with Factory Amplified Systems AND Non-Factory Amplified Systems

Speakers (Alpine SPV-65X-WRA):

• Max RMS Power Capacity: 75W
• Peak Power Capacity: 225W

Amplifier (Alpine S2-A55V):

• Dimensions:11.9” W x 2.25” H x 8.25” D
• Weight:7 lbs
• Power Rating:14.4V, < 0.1% THD +N
• Power Output:40W x 4 + 200W x 1 @ 4Ω, 60W x 4 + 300W x 1 @ 2Ω
• Bridged Power:120W RMS x 2 @ 4Ω
• S/N Ratio:>83dB
• Frequency Response:20Hz – 40kHz
• Damping Factor:>100CTA-2006-D Certification

Subwoofer (Alpine SS-SB10):

• Dimensions:18.5” (W) x 4.5” (H) x 12.5” (D) 
• Power Handling:300W RMS
• Frequency Response:35Hz-200Hz 
• X-Max: 11mm 1-Way Linear
• Nominal Impedance:2Ω 
• Copper Voice Coil:2” (50.0mm)  Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) 

Subwoofer (Alpine SS-SB12):

• Dimensions:22.25” (W) x 5.25” (H) x 13.125” (D) 
• Power Handling:300W RMS
• Frequency Response:30Hz-200Hz 
• X-Max:11mm 1-Way Linear
• Nominal Impedance:2Ω 
• Copper Voice Coil:2” (50.0mm)  Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)

Subwoofer (Alpine S-DB8V-TRK):

• Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 
• 600W RMS
• Frequency Response: 34Hz-200Hz 
• Sensitivity: 84dB 
• Dual voice coils wired in parallel for a 2Ω load (Two 4Ω enclosures)
• Compatible with S2-A60M Amplifier for Optimal Power Output
• Vented Enclosure Tuning Frequency: 36Hz  
• Custom spring-loaded speaker terminals fit up to 12AWG speaker wire

Here's what you can expect to be in your Alpine full system JK bundle from Trail Seven.

• Alpine S2-A55V Amplifier
• VK6 power kit for a single amp connection- power and ground fully prepped for install with ferrule leads, single fuse block
• 6-Channel RCA's
• Speaker wire- fully prepped with ferrules (amp to sub)

Alpine subwoofer options:

• Single 10” S-Series Shallow Preloaded Subwoofer Enclosure
• Single 12” S-Series Shallow Preloaded Subwoofer Enclosure
• Halo S-Series Pre-loaded Sub Enclosure S-DB8V-TRK

Alpine speakers based on Jeep year:

• '07-'14: This package will include (2) 6.5" component mid drivers with a direct fit connection for the knee panels, (2) 1" tweeters for the dash panel tombstone speakers with connectors and crossovers, (2) 6.5" component mid drivers with a direct fit connection to the sound bar with (2) 1" tweeters with mounting brackets for a coaxial connection.
• '15-'18: This package will include (2) 6.5" component mid drivers with a direct fit connection for the knee panels, (2) 1" tweeters with mounting plates, connectors, and crossovers for the dash panel, (2) 6.5" component mid drivers with a direct fit connection to the sound bar, and (2) 1" tweeters with mounting plates to the sound bar.
• 2 6.5" Woofers (knee panel)
• 2 6.5" Woofers (sound bar)
• 2 Tweeters (with 5" crossovers) (dash board)
• 2 Tweeters (with 5" crossovers) (sound bar)
• 4 Polyfill sheets
• 4 Tweeter mounting plates
• 4 Bridge mount brackets
• 4 Bridge mount wire covers
• 4 Foam strips (0.25" x 0.625")
• 4 Alpine logo badges