Skip to content
June Savings: MB Quart, Stinger, Sony, Kicker and Alpine Bundles!
May Specials going on for - Sony - Stinger - Kicker

Alpine SPV-65X-WRA Component 2-Way Weather Resistant Speakers | '07-'18 JK Wrangler

Price:
$249.95
Original price $249.95 - Original price $249.95
Original price
$249.95 - $249.95
Current price $249.95

Free US Standard Shipping, 30-Day Returns, 1-Year Warranty
Fits: '07-'18 Jeep® Wrangler JK

SOUND THAT’S OPTIMIZED FOR THE JK

These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.

  • Installation Note: Completely plug-n-play, and no modification is required.
  • Estimated Installation Time: 1 Hours
  • Installation Instructions

Product Information

Features, Description, Reviews, Q&A ,Specs & Installation

OVERVIEW

Sound That’s Optimized for the JK Wrangler: These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.

  • Installation Note: Completely plug-n-play, and no modification is required.
  • Estimated Installation Time: 1 Hours 

Speakers Built for Your 2007-2018 JK: The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.

Weather Resistant: Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.

FEATURES

  • 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters
  • 1” Teteron dome tweeter
  • Steel frame with factory speaker mounting tabs
  • Includes vehicle specific speaker connectors

TECH SPEC

  • Max RMS Power Capacity: 75W
  • Peak Power Capacity: 225W
  • CTA-2031 Power Rating: 75W RMS, 225W Peak
  • Nominal impedance: 4 Ohm
  • Frequency response: 65-22kHz
  • Weather resistant: IP55

WHAT'S IN THE BOX

  • 2 Woofers
  • 2 Tweeters (with 5" wire attached)
  • 2 Tweeter crossovers (in-line)
  • 2 Polyfill sheets
  • 2 Tweeter mounting plates
  • 2 Bridge mount brackets
  • 2 Bridge mount wire covers
  • 2 Foam strips (0.25" x 0.625")
  • 2 Alpine logo badges
  • Warranty information
  • On-line product registration information
  • Important Notice sheet
  • Installation instructions
  • Specifications on box

Ask A Question

Overall rating: 5.0 / 5 from 3 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

perfect fit and sounds great

"love my Alpine speaker set for my 2018 Wrangler, replaced both sets of speakers with the SPV-65X, install was easy, literally plug and play, install video was perfect and these sound great with the Alpine iLX head unit and a 100W powered sub from Rockville Audio"

Paul B. (5/5)

Plug and Play - East to install.

"I installed these into my 2012 JK with the older ILX-I207 Alpine head unit. The sound is far superior to the stock speakers. I chose these over other speakers because of the plug-and-play functionality. This made it extremely quick and easy to swap out the speakers. The new speakers sound full and rich. Note to all planning to swap out speakers on your own. Once the physical speaker install is done your new speakers will NOT sound good till you set up the head unit. For me, this meant resetting all the source levels to match: 1. Starting with the lowest sounding then one by one making the other source levels the same by ear. 2. Once I was happy with all the levels I raised the main volume till the sound started to distort. 3. I then backed it back down till the distortion stopped 4. Next you need to adjust the Amp output volume up so you can raise the main volume as close to the max volume. (Repeat steps 1-4 till I could reach max volume without distortion for me 50% amp volume.) All head units will be different. For my configuration, the Alpin ILX-i207 hid the amp adjustments deep in the configuration. Under System/Factory System Setup/Maestro Module/Maestro Settings/Factory Amp Settings – 10% to 100%"

Robert D. (5/5)

"A+++++"

Roger (5/5)

Q&A

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare