Alpine Plug and Play Full System S-Series 5-Channel, Speakers, Sub Bundle | '07- '18 Jeep JK Wrangler

PRODUCT HIGHLIGHTS:

Alpine SPV-65X-WRA Speakers: The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.

Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.

• Built specifically for the 07-18 Jeep Wrangler JK
• Weather resistant
• 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters to fit both the '07-'14 Wranglers as well as the '15-'18 Wranglers
• CTA-2031 Power Rating: 75W RMS, 225W Peak
• Nominal impedance: 4 Ohm
• Frequency response: 65-22kHz
• 1” Teteron dome tweeter
• Steel frame with factory speaker mounting tabs
• Weather resistant: IP55
• Includes vehicle specific speaker connectors

Alpine Next-Gen S-Series 5-Channel Amplifier: The Next-Gen Alpine S-Series S2-A55V 5-Channel Amplifier is Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price.

• Power Output: 40W x 4 + 200W x 1 @ 4Ω, 60W x 4 + 300W x 1 @ 2Ω
• Hi-Res Audio Playback (192kHz/24Bit)
• 5-Channel Amplifier
• High-Efficiency Digital Circuit Design
• Alpine’s Dual Negative Feedback Control Circuit
• High Bandwidth Amplifier
• Alpine’s Premium Class D Circuit Design
• One-sided terminal layout
• Top panel sound controls
• Quick connect power and speaker terminals
• Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately)

Single 10" S-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the 10" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.

• Preloaded 10” S-Shallow Subwoofer
• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)
• Power Handling: 300W RMS
• Frequency Response: 35Hz-200Hz
• X-Max: 11mm 1-Way Linear
• Nominal Impedance: 2Ω
• Copper Voice Coil: 2” (50.0mm)
• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)
• Optimal Sealed Cabinet Quality
• Neodymium Magnet
• Front-Mounted Neodymium Motor
• Alpine Gen2 DD Linear Magnetic Circuit
• Rugged Polymer Enclosure Cabinet
• Adjustable, Foam-padded Mounting Brackets for Flexible Installation & Reduced Vibration

Single 12" S-Series Preloaded Sub Enclosure: With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.

• Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)
• Power Handling: 300W RMS
• Frequency Response: 30Hz-200Hz
• X-Max:11mm 1-Way Linear
• Nominal Impedance: 2Ω
• Copper Voice Coil: 2” (50.0mm)
• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)
• Optimal Sealed Cabinet Quality
• Preloaded 12” S-Shallow Subwoofer
• Neodymium Magnet
• Front-Mounted Neodymium Motor
• Alpine Gen2 DD Linear Magnetic Circuit
• Rugged Polymer Enclosure Cabinet
• Adjustable, Foam-padded Mounting Brackets for Flexible Installation & Reduced Vibration
  

Alpine Halo S-Series Preloaded Sub Enclosure S-DB8V-TRK: With the adjustability from 40" to 51", this subwoofer is a perfect fit for the Jeep Wrangler JK. Two 8” subwoofers are preloaded into a compact enclosure which are a perfect fit for rear cargo area. Rubber “feet” are adjustable in height to accommodate uneven floors and the size does not prevent accessing the cargo area under mat storage bin.

• 600W RMS
• Frequency Response: 34Hz-200Hz
• Dual voice coils wired in parallel for a 2Ω load (Two 4Ω enclosures)
• Compatible with S2-A60M Amplifier for Optimal Power Output
• Vented/ Ported Enclosure Tuning Frequency: 36Hz
• Custom spring-loaded speaker terminals fit up to 12AWG speaker wire
• 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D)
• Groundbreaking Alpine Halo Design
• ProLink™ Ported Enclosure
• Expandable Width from 40" to 51"
• Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas
• Ported Enclosures with Next-Gen R-Series Subwoofers
• Front Link Alpine Branded Bracket
• Side-Firing Cabin Loading Ports
• Premium Alpine Wire Terminals
• Twist-Lock Grille Mount System
• CARB Compliant 5/8" MDF Construction
• Premium Black Carpet