Skip to content
Highest Quality, Hand-Picked Jeep Parts & Accessories Shipped to Your Door
Highest Quality, Hand-Picked Jeep Parts & Accessories Shipped to Your Door

Kicker Complete 5-Channel Amp Kit Bundle | '18- '23 JL Wrangler/ '20- '23 JT Gladiator

Save 20% Save 20%
Original price $587.00
Original price $587.00 - Original price $977.00
Original price $587.00
Current price $469.60
$469.60 - $781.60
Current price $469.60

Free US Standard Shipping, 60-Day Returns, 2-Year Warranty

Kicker Complete 5-Channel Amp Kit Bundle | '18- '23 JL Wrangler/ '20- '23 JT Gladiator

Factory Amplifier Bypass!

Don't want to route new wires to the speakers? We have an option to include a plug and play harness which bypasses the factory amplifier and utilizes the existing speaker wire to each speaker for an easy installation. Our harness will connect directly from the new amplifier to the factory amplifier located beneath the steering wheel control. This will bypass the factory amp, and will connect the speakers directly to the new amp without the need of running new wires to each location.

Whether you have a factory/ OEM head unit or an upgraded aftermarket head unit, this 5-channel Kicker amp kit bundle is prepared for your Jeep!

Complete Plug and Play Option Available!

Selecting the AAMPRO module to connect to your factory head unit? If so, we'll prepare the harness as a complete plug and play harness which will utilize the factory speaker wires so you won't have to run new wires to each speaker!

How To Install Your Kicker Speaker Bundle w/o knee speakers

TESTED AND APPROVED BY TRAIL SEVEN: Our Kicker 6 and 8 Speaker Bundle has been installed and tested on our Trail Seven Jeep and we're pleased to put our stamp of approval on these speakers!

  • Five Channels of Fun

    The CXA660.5 Amplifier is built to be the complete package in one cool-looking amp.

    This CX amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+™ (Fail-safe Integration Technology-PLUS), giving you superior clarity and dependability.

    KickEQ™ variable bass boost gives you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is also included, letting you quickly tune your entire system to taste. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

    This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels, plus as much as 300 watts into one bass channel. See below for more details.

    Ask A Question

  • Kicker CXA660.5 5-Channel Amplifier

    • Power Watts- 4ohm stereo- 65x4, 2ohm stereo- 90x4, 4ohm mono 150x1, 2ohm mono 300x1
    • Frequency response: 10Hz-20kHz

    Kicker 47VK6 Amp Kit

    • 16GA speaker wire (14 ft)
    • Power cable (16.5 ft)
    • Mesh power cable (2.5 ft)
    • Ring terminal for black cable
    • Blue remote wire (19 ft)
    • Fuse holder (6/8GA)
    • Fuse (60A)

    Stinger SI4612

    • 6-channel directional ribbon style RCA's (12')

    Speed Wire- 9 wire

    • 9-strand 18GA wire (20 ft)

    PAC AmpPRO AP4-CH41- Amplifier Interface

    • Only needed if using factory head unit/ stereo ('18+ JL Wrangler or JT Gladiator)
    • 6-channel RCA outputs (front, rear, subs)
    • Retains factory steering controls
    • Wire remote level control for sub controls

    Factory Amp ByPass Harness

    • Bypass your factory amplifier and utilize the existing speaker wire
    • Connects new amplifier directly to the factory amp connections under steering column
    • Allows the use of the factory speaker wire routed to each speaker location
    • Plug and Play harness

      Ask A Question

      • Kicker CX660.5 5-Channel Amplifier
      • Kicker VK6 Amp Kit
      • Stinger SI4612 6-Channel RCA
      • 9-Wire- 20'
      • PAC AmpPRO AP4-CH1 (if opted for)
    • Ask A Question

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare