Kicker Powered Down-Firing 10" Enclosure Upgrade | '07-'18 JK Wrangler/ '18-'26 JL Wrangler

Your plug and play bundle is hand assembled in our Frederick, MD facility. Current processing lead times for plug and play bundles from order to ship: 3-5 business days

Ready for your Jeep Wrangler:

Kicker has come through for us in the Jeep world again! Can't fit a Hideaway sub under your passenger seat?  Well Kicker has the solution here with their new release!  Kickers Powered Down-Firing Enclosure will sit easily in the rear bed of your Jeep Wrangler.  

What is the Down-Firing Enclosure?

The PTRTP builds on the overwhelming success of our down-firing, thin-profile subwoofer enclosure by adding a signature KICKER amplifier to power it. Sporting a passive radiator and KICKER amplification, this box has been perfectly tuned and engineered from all angles, acoustic and electric, to be the absolute best-sounding, most-efficient, and loudest enclosure possible.

The PTRTP combines an active, award-winning CompRT subwoofer, a passive reFLEX sub, and a power-matched, built-in amplifier for an efficient, pounding bass solution for your ride.

• Compact, factory-tuned enclosure for tight locations to fit many trucks and SUVs
• Two models available – 12-inch sub with 500-watt amp, or a 10-inch sub with 400-watt amp
• Amp is built-in and power-matched for hard-hitting bass
• Easily integrates with factory system
• Down-firing for ultimate driver protection
• Thick, tough internal bracing to resist stacking weight
• Active CompRT Sub matched with passive reFLEX™ sub for extra output
• Remote bass control included

• RMS power (watts) = 400
• KickEQ boost = variable to +6dB @ 40Hz
• Crossover = 12dB/octave low pass at 50-120Hz;24dB/octave high pass at 25Hz
• Input sensitivity = Low Level – 125mV-5V; High Level – 1V-40V
• Size = 13 1/4"(D) x 6"(H) x 25(W)
• Weight = 9.4lbs

Amp Kit 47VK6 (needed for all installations):

• 16GA yellow/gray speaker wire (14 ft.)
• 2-channel, dual-injection interconnects (16 ft.)
• Matte red power cable (16.5 ft.)
• Ring terminal for red cable
• Nylon mesh loom on red cable (6 ft.)
• Matte black power cable (2.5 ft.)
• Ring terminal for black cable
• Blue remote wire (19 ft.)
• MANL fuse holder (6/8GA)
• Nickel-plated MANL fuse (60A)
• 2-seamed crimp spade terminals (red/blk)
• 18-22GA red vinyl butt connector
• 2 18-22GA spade connectors (gray/blk)
• 6 black cable ties (4 inch)
• Snap bushing grommet

KISL harness (needed only for stock head unit application):

Don’t have an aftermarket radio? KICKER amplifiers accept a wide range of factory speaker signal. Use the KISL to easily connect factory speaker wires right to your amplifier. No line out converter needed

KISL features 16ga speaker wire-to-RCAs and includes Female to Female adapters.

Connecting to a stock radio/ head unit:

• Kicker Powered Down-Firing 10" Enclosure
• Remote bass level control
• 47VK6 Kit- power, ground, fuse, RCA kit for amp/ sub
• Kicker KISL RCA converter

Connecting to an aftermarket radio/ head unit:

• Kicker Down-firing sub
• Remote bass level control
• Kicker RCA splitter for single or double RCA out head units
• Kicker 5M RCA extension
• Pre-terminated in-line fuse holder for easy battery connection
• Pre-terminated ground wire lead
• Remote bass control with mounting hardware