Kicker Complete 4-Channel Amp Kit Bundle | '18- '23 JL Wrangler/ '20- '23 JT Gladiator

Your plug and play bundle is hand assembled in our Frederick, MD facility. Current processing lead times from order to ship: 6-8 business days

Factory Amplifier Bypass!  

Don't want to route new wires to the speakers?  We have an option to include a plug and play harness which bypasses the factory amplifier and utilizes the existing speaker wire to each speaker for an easy installation.  Our harness will connect directly from the new amplifier to the factory amplifier located beneath the steering wheel control.  This will bypass the factory amp, and will connect the speakers directly to the new amp without the need of running new wires to each location.  

Whether you have a factory/ OEM head unit or an upgraded aftermarket head unit, this 4-channel Kicker amp kit bundle is prepared for your Jeep! 

Complete Plug and Play Option Available! 

Selecting the AAMPRO module to connect to your factory head unit?  If so, we'll prepare the harness as a complete plug and play harness which will utilize the factory speaker wires so you won't have to run new wires to each speaker! 

TESTED AND APPROVED BY TRAIL SEVEN: Our Kicker 6 and 8 Speaker Bundle has been installed and tested on our Trail Seven Jeep and we're pleased to put our stamp of approval on these speakers! 
FLEXIBLE and FUN

Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

Highly efficient heat sinks keep the amp cool with a sophisticated new look, while KICKER’s FIT+™ (Fail-safe Integration Technology-PLUS), gives you outstanding noise rejection - even with premium factory audio systems.

This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details.

Flexible and Fun

Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

Highly efficient heat sinks keep the amp cool with a sophisticated new look, while KICKER’s FIT+™ (Fail-safe Integration Technology-PLUS), gives you outstanding noise rejection - even with premium factory audio systems.

This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details.

Kicker CXA360.4 4-Channel Amplifier:

• Power Watts- 4ohm stereo- 65x4, 2ohm stereo- 90x4, 4ohm mono 180x2
• Frequency response: 10Hz-20kHz

Kicker 47VK6 Amp Kit:

• 16GA speaker wire (14 ft)
• 2-channel, dual RCA's (16 ft)
• Power cable (16.5 ft)
• Mesh power cable (2.5 ft)
• Ring terminal for black cable
• Blue remote wire (19 ft)
• Fuse holder (6/8GA)
• Fuse (80A)

PAC AmpPRO AP4-CH41- Amplifier Interface:

• Only needed if using factory head unit/ stereo ('18+ JL Wrangler or JT Gladiator)
• 6-channel RCA outputs (front, rear, subs)
• Retains factory steering controls
• Wire remote level control for sub controls
• Plug and Play harness

Factory Amp ByPass Harness (if needed and selected):

• Bypass your factory amplifier and utilize the existing speaker wire
• Connects new amplifier directly to the factory amp connections under steering column
• Allows the use of the factory speaker wire routed to each speaker location
• Plug and Play harness
  

• Kicker CX360.4 4-Channel Amplifier
• Kicker VK6 Amp Kit
• 4-Channel RCA
• Amplifier Harness
• PAC AmpPRO AP4-CH1 (if opted for)
• Factory Amp Bypass Harness (if opted for)