Skip to content
Highest Quality, Hand-Picked Jeep Parts & Accessories Shipped to Your Door
Highest Quality, Hand-Picked Jeep Parts & Accessories Shipped to Your Door

Alpine Plug and Play Sub & Mono S-Series Amp Bundle | '18-'23 JL/ '20-'23 JT

Save 15% Save 15%
Original price $1,297.00
Original price $967.00 - Original price $1,667.00
Original price $1,297.00
Current price $1,102.45
$821.95 - $1,416.95
Current price $1,102.45

Free US Standard Shipping, 60-Day Returns, 2-Year Warranty
FITS: 2018- 2023 Jeep Wrangler JL and 2020- 2023 Jeep Gladiator JT

Factory Amplified or Non-Factory Amplified?  See "Factory Equipment" tab below for assistance with identifying which package is right for your jeep. 

    We've taken the guess work out of connecting a subwoofer to your factory radio.  Our plug and play bundle connects directly to your factory radio with an easy to follow installation video below.  

    Installation Video by Trail Seven:

    TESTED AND APPROVED BY TRAIL SEVEN: Our Mono Amp/ Sub Bundle has been installed and tested on our Trail Seven Jeep and we're pleased to put our stamp of approval on this bundle. 

    • OVERVIEW
    • FACTORY EQUIPMENT
    • PRODUCT HIGHLIGHTS
    • ASK A QUESTION
    • Overview

      Regardless if you have the factory amplified system (Premium), or the factory non-amplified system (Standard), we have a bundle that is right for you and your jeep!  You'll find the explanation of factory amplified systems (Premium) and factory non-amplified systems (Standard) on the "Factory Equipment" tab above.  

      All of our bundles are pre-wired and completely assembled prior to shipping from our Frederick, Maryland shop. When you get your bundle, it's all prepped and ready for a plug and play install into your Jeep! Here's what you can expect to be in your Kicker mono amp/ sub bundle from Trail Seven.  

      • Kicker Key 500.1 Amplifier
      • PAC LPA 2.2 or CH41 depending on if jeep is factory amplified or non-factory amplified. 
      • VK6 power kit for a single amp connection- power and ground fully prepped for install with ferrule leads, single fuse block
      • PKD4 power kit for a dual amp connection- power and ground fully prepped for install with ferrule leads, single fuse block and dual fuse for multiple amp connections
      • 2-Channel RCA's
      • Speaker wire- fully prepped with ferrules (amp to sub)
      • Kicker sub based on selection
        • 48TRTP122 12" Down-Firing CompRT Loaded Enclosure
        • 48TRTP102 10" Down-Firing CompRT Loaded Enclosure
        • SSV Works, driver side mounted enclosure loaded with a Kicker 48CWRT104 10" DVC CompRT Subwoofer
      • Follow our installation videos above to complete your speaker upgrade!
      • See below for even more details!
      Interested in our bundle for your JL or JT Jeep but have a question first? Simply complete the form below and we'll get back to you promptly!

      Ask A Question

    • Is your Jeep Factory Amplified? 

      Factory Amplified:

      The easiest way to determine if your jeep is factory amplified or not, is to identify the factory subwoofer which is always paired up with the amplified package.  See pics for easy identification for the '18- '23 Wrangler JL and the '20- '23 Gladiator JT.  If your Jeep is equipped with the below, then you will select Factory Amplified from the drop down menu.  

      See the Installation Guide for further clarification and installation procedures. 

      Ask A Question

    • Product Highlights

      Our bundle comes to you just as you see it in the product pics which is prepped and ready to install.  We terminate the power and ground leads, we set up the amp harness and PAC module with the connectors needed.  Just follow the installation guide and video for an easy install. 

      Select the correct option for your jeep based on factory amplified or non-factory amplified, then select which subwoofer best fits your application.

      Side Mount Enclosure W/ 10" Kicker CompRT

      SSV Works custom molded sub enclosure is designed for a 10" subwoofer and easily installs behind the passenger seat on the drivers side. NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10" sub.

      • Side mounted enclosure
      • Dual Voice Coil 4 Ohm
      • 400 watts RMS
      • 800 watts peak

      Kicker Down-Firing 12" CompRT Enclosure

      Fitting perfectly under your truck seat or in the trunk, ultra-efficient TRTP™ Down-Firing Loaded Enclosures deliver huge bass without taking up needed cargo room. They come loaded with a passive reFLEX™ subwoofer and CompRT active sub that provides extremely low bass.

      • Thin-Profile
      • 500 watts RMS recommended amplifier power source
      • 1000 watts peak power
      • 14 5/8" (D) x 6 1/8" (H) x 27 1/2" (W)

      Kicker Down-Firing 10" CompRT Enclosure

      Fitting perfectly under your truck seat or in the trunk, ultra-efficient TRTP™ Down-Firing Loaded Enclosures deliver huge bass without taking up needed cargo room. They come loaded with a passive reFLEX™ subwoofer and CompRT active sub that provides extremely low bass.

      • Thin-Profile
      • 400 watts RMS recommended amplifier power source
      • 800 watts peak power
      • 13 1/4" (D) x 5 5/8" (H) x 25 5/8" (W)

      Kicker KEY500.1 Smart Mono Amplifier

      Using KICKER’s supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp! 

      • 24dB sub-sonic and low-pass crossovers, bass boost and gain controls
      • smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).
      • Super compact, easily  mounts under the driver seat of a jeep
      • 500 x 1 @ 1 Ohm, 300 x 1 @ 2 Ohm, 150 x 1 @ 4 Ohm
      • Dimensions
        • W: 4 1/8" 
        • H: 1 11/16"
        • L: 8 1/8"

      PAC LPA 2.2

      For jeeps that are not equipped with the factory amplified system.  See the Package Options tab to help determine if your jeep is factory amplified or non-factory amplified.  Allows connection of a mono-amp.  If upgrading to add a 4-channel amp, or installing a 5-channel amp, the PAC CH41 (R.2) is needed. 

      LocPRO ADVANCED line output converters feature incredible input power capabilities, enhanced output controls, and noise isolation countermeasures. Combined with the newest vehicle systems' compatibility, these features are the gateway for your audio aspirations

      • Steel housing
      • Low pass filter
      • Bass boost 
      • Single stereo gain control
      • fClip indicator
      • Turn-on mode selection (remote and DC)
      • 9.5V Output voltage
      • Removable quick-connect with screw-type terminal
      • Wide range DC offset

      PAC CH41 (R.2)

      For jeeps that are equipped with the factory amplified system.  See the Package Options tab to help determine if your jeep is factory amplified or non-factory amplified.  Allows the connection of a mono amp as well as 4-channel amp, or a 5-channel amp.  

      This latest version of AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. 

      • Can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
      • Enables the addition of a subwoofer to an amplified sound system
      • Variable volume, fade, balance, bass, mid and treble audio settings
      • Front, rear, sub preamp outputs (5 volt RMS)
      • Customized OE bass, mid and treble center frequency selection
      • Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
      • Plug-n-Play installation
      • Sublevel controller

      Ask A Question

    • Ask A Question

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare