Like for Like Speaker Swap Upgrade Installation Guide I '21-'24 Bronco

Welcome to your Bronco Speaker Installation Guide. 

The following will walk you through the entire installation which includes a video at the bottom of each section below.   

If you have any questions at all, or need anything during the installation, we're only a phone call away and we're available Monday-Friday, 9am-5pm est. for any support needed, or you can shoot us an email at support@trailseven.com.  

These installation notes are intended to be used in conjunction with the installation videos based on the your bundle.  The options will include either the like for like speaker swap upgrade, and/ or the 6.5" rear roll bar speaker upgrade. 

• Alpine Speakers
• Kicker Speakers
• MTI rear pods with 6.5" speakers
• SSV Works rear pods with 6.5" speakers

Alpine (like for like) Speaker Bundle upgrade:

1. Removal: Dash, Kick Panel, and Rear Roll Bar speakers will follow as demonstrated in the video. 

• B&O systems will receive 3 dash speakers while non-B&O systems will receive 2 dash speakers. 
• Like for Like swap will include 4" coax speakers for the rear roll bar. 

2. Installation:

• The kick speakers will be mounted in the appropriate brackets, with the connectors attached and will utilize the factory mounting hardware for installation. 
• The dash and rear roll bar speakers will have the break away tabs removed, with the connectors attached and will utilize and will utilize the factory mounting hardware for installation. 

3. Trail Seven Alpine Installation Video:

Kicker (like for like) Speaker Bundle upgrade: 

1. Removal: Dash, Kick Panel, and Rear Roll Bar speakers will follow as demonstrated in the video. 

• B&O systems will receive 3 dash speakers while non-B&O systems will receive 2 dash speakers. 
• Like for Like swap will include 4" coax speakers for the rear roll bar. 

2. Installation:

• The kick speakers will be mounted in the appropriate brackets, with the connectors attached and will utilize the factory mounting hardware for installation. 
• The dash and rear roll bar speakers will have the break away tabs removed, with the connectors attached and will utilize and will utilize the factory mounting hardware for installation. 

3. Trail Seven Kicker Installation Video:

Rear Roll Bar 6.5" Upgrade (MTI Pods): 

1. Removal: Rear Roll Bar speakers will follow as demonstrated in the video. 

2. Installation:

• You will need to transfer the factory connector from the pods to the new MTI pods.  Remove the connector using a small flat head screw driver and transfer the connector with the grommet over to the MTI pod. 
• Mount using the provided hardware but do not mount the speakers until the pod has been mounted. 

3. Trail Seven MTI Rear Pod Installation Video:

Rear Roll Bar 6.5" Upgrade (SSV Pods):

1. SSV Works Rear Pod Installation Video: